Excellent H12-323_V2.0 PDF Dumps With 100% PrepAwayExam Exam Passing Guaranted [Jun-2026]
100% Pass Your H12-323_V2.0 HCIP-WLAN V2.0 at First Attempt with PrepAwayExam
To prepare for the Huawei H12-323_V2.0 (HCIP-WLAN V2.0) Exam, candidates can take advantage of various training resources. There are numerous books, courses, and study materials available that can help candidates understand the exam objectives and prepare for the test. Additionally, Huawei offers an official certification training program that covers all the topics included in the exam, along with hands-on practice sessions. By taking advantage of these resources, candidates can feel confident in their ability to pass the Huawei H12-323_V2.0 (HCIP-WLAN V2.0) Exam and pursue a successful career in wireless networking.
Huawei H12-323_V2.0 exam is ideal for WLAN professionals who want to advance their careers in the wireless network industry. HCIP-WLAN V2.0 certification helps you stand out in a competitive job market and demonstrates your commitment to continuous learning and professional development. It is also an excellent opportunity to learn from industry experts and network with other WLAN professionals.
Huawei H12-323_V2.0 certification exam is a crucial step towards becoming a certified HCIP-WLAN V2.0 professional. H12-323_V2.0 exam is designed to test your knowledge and skills in deploying, managing, and troubleshooting wireless LAN networks. HCIP-WLAN V2.0 certification is recognized globally and validates your expertise in wireless network technologies.
NEW QUESTION # 71
A customer's existing network has many old terminals, and the roaming sensitivity is high. The signal strength is already very low, but the terminal does not start roaming, resulting in a poor terminal experience. The customer requires that the terminal can switch to other APs when the signal strength is lower than -75 dBm, so the weak signal user offline control function is enabled on the wireless controller. Which of the following configuration commands for controlling the offline of weak signal users is correct?
- A. [WAC-wlan-view] rrm-profile name test
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-Threshold enable
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-threshold snr 75 - B. WAC-wlan-view] rrm-profile name test
[WAC-wlan-rm-prof-test] undo smart-roam quick-kickoff - threshold disable
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-thresholds nr 20 - C. [WAC-wlan-view] rrm-profile name test
[WAC-wlan-rrm-prof-test] undo smart-roam quick-kickoff-threshold disable
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC-wlan-rm-prof-test] smart-roam quick-kickoff-threshold snr 75 - D. WAC-wlan-view] rrm-profile name test
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-Threshold enable
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-threshold check-snr
[WAC-wlan-rrm-prof-test] smart-roam quick-kickoff-threshold snr 20
Answer: B
NEW QUESTION # 72
In VRRP hot standby networking, which of the following descriptions of VRRP protocol configuration are correct? (Multiple choice)
- A. The default priority of the VRRP protocol is 100. The WAC with a smaller priority value will become the primary WAC
- B. The virtual IP address of the VRRP protocol in the primary and backup WAC must be configured--
- C. The vrid of the VRRP protocol in the primary and backup WACs must be configured consistently
- D. The default interval for sending VRRP protocol heartbeat messages is 1 second
Answer: B,D
NEW QUESTION # 73
The VRRP hot backup of Huawei wireless controller only supports VRRP master-slave backup mode and does not support VRRP load sharing mode.
- A. True
- B. False
Answer: A
NEW QUESTION # 74
An engineer logs in to WAC to check the terminal roaming track and finds the roaming track as shown below. Which of the following descriptions of the terminal roaming situation is wrong?
- A. The terminal experienced an 802.11r roaming
- B. The signal strength is -58dBm when the terminal accesses a new AP after roaming
- C. The name of the wireless signal accessed by the terminal is test
- D. The terminal roams from AP: test1 to AP: test2
Answer: D
NEW QUESTION # 75
In the process of deploying WAC on the cloud, the plug-and-play feature of WAC (PnP) can be used to simplify the initial configuration and enable the WAC device to go online quickly. Which of the following protocols does the WAC use to negotiate with the upstream device (which can be a cloud switch or cloud firewall) to obtain the PnP VLAN as the management VLAN?
- A. NETCONF
- B. DHCP
- C. SNMP
- D. LLDP
Answer: D
NEW QUESTION # 76
Drag and Drop Question
WAC supports multiple methods to obtain the working mode and iMaster NCE-Campus address.
Please sort them in descending order of priority.
Answer:
Explanation:
NEW QUESTION # 77
Which of the following descriptions about the AC networking mode included with the board is wrong?
- A. Compared with independent WAC networking, on-board AC networking supports more WLAN functions and features.
- B. The AC can be deployed in the aggregation layer or the core layer of the network and is suitable for WLAN networks in medium and large campuses.
- C. The onboard AC networking can realize the unified management of wired and wireless networks and improve the efficiency of network operation and maintenance
- D. Compared with independent WAC networking, on-board AC networking can effectively reduce network construction costs.
Answer: A
NEW QUESTION # 78
From the perspective of wireless networks, the alarms on the CampusInsight platform include high channel utilization, weak signal coverage, air interface congestion, high interference, terminal capacity, authentication failure, user collective offline, non-5G priority access, etc.
- A. True
- B. False
Answer: A
NEW QUESTION # 79
In Huawei's intelligent roaming solution, AP needs to collect surrounding terminal information, discover neighbor APs, and periodically report to WAC to form neighbor table entries. Which of the following are the ways to discover neighbor APs? (Multiple choice)
- A. Through the Beacon report mechanism of the 802.11k protocol, the terminal is required to report the neighbor APs it sees
- B. The neighbor table is constructed based on the APs in the load balancing group.
- C. AP listens to the Probe frame of the terminal
- D. AP periodically switches channels and actively scans for terminals
Answer: A,C,D
NEW QUESTION # 80
A customer's existing network has a blind spot in wireless signal coverage, resulting in some wired terminals being unable to access the network.
Engineers adjust the transmit power of the surrounding AF to expand the coverage and fill in the blind spots. Which of the following configuration commands for manually adjusting the AR transmit power is correct?
- A. [WAC-wlan-ap-group-ap-group1] radio 0
[WAC-wlan-group-radio-ap-group1/0] calibrate auto txpower-select enable
[WAC-wlan-ap-group-ap-group1] radio
[WAC-wlan-group-radio-ap-group1/1] calibrate auto-txpower-select enable
[WAC-wlan-group-radio-ap-group1/1] quit
[WAC-wlan-view] calibrate enable manual
[WAC-wlan-view] calibrate manual startup - B. [WAC-wlan] ap-id 1
[WAC-wlan-ap-1] radio 0
[WAC-wlan-radio-1/0] calibrate auto-txpower-select disable
[WAC-wlan-radio-1/0] eirp 23
[WAC-wlan-radio-1/0] radio 1
[WAC-wlan-radio-1/1] calibrate auto-txpower-select disable
[WAC-wlan-radio.1/1jeirp 23 - C. [WAC-wlan] ap-id1
[WAC-wlan-ap-1] radio
[WACwlan-radio-1/0] calibrate auto-txpower-select enable
[WAC-wlan-radio-1/0] eirp23
[WAC-wlanradio-1/0 ] radio1
[WAC-wlan-radio-1/1 ] calibrate auto-txpower-select enable
[WAC-wlan-radio-1/1] eirp 23 - D. [WAC-wlan-ap-group-ap-group1] radio
[WACwlan-group-radio-ap-group1/0] calibrate auto-channel-select enable
[WAC-wlan-ap-group-ap-group1] radio1
[WAC-wlan-group-radio-ap-group1/1] calibrate auto-channel-select enable
[WAC-wlan-group-radio-ap-group1/1] quit
[WAC-wlan-view] calibrate enable manua
[WAC-wlan-view] calibrate manual startup
Answer: B
NEW QUESTION # 81
In the terminal migration function, the target AP for the terminal migration needs to be confirmed before the terminal is migrated, and the target AP is selected from the terminal's neighbor APs.
Therefore, the wireless controller needs to collect, store and maintain the terminal's neighbor AP information list. The neighbor AP information of the neighbor terminal is obtained by terminal probe collection and terminal Beacon report measurement.
Which of the following options belong to the terminal Beacon report measurement method?
(Multiple choice)
- A. Active
- B. Probe
- C. Passive
- D. Beacon Table
Answer: A,C,D
NEW QUESTION # 82
An engineer configures the spectrum navigation function on a wireless controller. The command line is as follows. Which of the following descriptions of the configuration command is wrong?
[WAC-wlan-view] rrm-profile name wlan rrm
[WAC-wlan-rrm-prof-wlan- rrm] band-steer balance start-threshold 20
[WAC-wlan-rrm-prof-wlan-rrm] band-steer balance gap-threshold 60
[WAC-wlan-rrm-prof-wlan-rrm] band-steer snr-threshold 20
[WAC-wlan-rrm-prof-wlan-rrm] band-steer deny-threshold 6
[WAC-wlan-rrm-prof-wlan-rrm] quit
- A. When the number of users accessing the AP exceeds 20, the proportion of 5G RF access users will be calculated. If it exceeds 60%, the newly launched terminals will be guided to access 5G first.
- B. When the number of users connected to the AP does not reach 20, new terminals will be given priority to access 5G
- C. When the number of users connected to the AP does not reach 20, the new online terminal initiates an association request using 2.4G, and the AP will reject its association. The maximum number of rejections is 6 times
- D. When the SNR in the 5G Probe sent by the terminal to the AP exceeds 20 dB, 5G access is given priority.
Answer: C
NEW QUESTION # 83
In the daily operation and maintenance of WLAN networks, engineers need to regularly observe whether the fan of the equipment is working normally, because when the temperature continues to rise to a dangerous temperature, the equipment will automatically cut off the power, causing business interruption.
- A. True
- B. False
Answer: A
NEW QUESTION # 84
Leader Which of the following are included in the AP working mode? (Multiple choice)
- A. Routing Mode
- B. Bridge Mode
- C. Active/standby mode
- D. Gateway Mode
Answer: B,D
NEW QUESTION # 85
Multicast messages are sent at a low rate on the air interface. A large number of such messages will occupy a large amount of air interface resources, affecting the transmission of normal user service data packets. In scenarios without multicast services, when the service data forwarding method adopts tunnel forwarding, it is recommended to configure multicast message suppression on WAC. Which of the following configuration commands for the multicast packet suppression function is correct?
- A. [WAC-wlan-view] traffic-profile name test
[WAC-wlan-traffic-prof-test] traffic-optimize multicast-suppression packets 1000 - B. WAC-wlan-view] rrm-profile name test
[WAC-wlan-rrm-prof-test] traffic-optimize broadcast-suppression packets 1000 - C. [WAC-wlan-view] rrm-profile name test
[WAC-wlan-rm-prof-test] traffic-optimize multicast-suppression packets 1000 - D. WAC-wlan-view] traffic-profile name test
[WAC-wlan-traffic-prof-test] traffic-optimize broadcast-suppression packets 1000
Answer: A
NEW QUESTION # 86
Which of the following descriptions about dual-link cold backup and N+1 backup are wrong?
(Multiple choice)
- A. In dual-link cold backup and N+1 backup scenarios, the AP needs to establish two CAPWAP slave channels at the same time.
- B. Dual-link cold backup and N+1 backup, WAC does not back up synchronization information
- C. For dual-link backup and N+1 backup, the active/standby switchover will only be performed after the CAPWAP link is detected and the timeout occurs.
- D. In the process of active/standby switching, the wireless service will not be interrupted in dual-link cold backup, while in the process of active/standby switching, the wireless service will be interrupted briefly in N+1 backup.
Answer: A,D
NEW QUESTION # 87
When using the CloudCampus app to test WLAN network quality, you can test WLAN network coverage, service experience, and network)
Answer:
Explanation:
Stability
NEW QUESTION # 88
In WLAN network planning in crowded scenarios such as lecture halls or banquet halls, due to the large number of concurrent users, engineers will give priority to APs with fewer MIMOs but more radio frequencies when selecting AP models.
- A. False
- B. True
Answer: A
NEW QUESTION # 89
Directional antennas have strong signal strength gain in the horizontal and vertical lobes, but no signal outside the lobe range. Therefore, it is recommended to use high-gain directional antennas to increase the coverage distance of outdoor APs.
- A. True
- B. False
Answer: A
NEW QUESTION # 90
In network capacity design, which of the following is not a consideration for capacity setting?
- A. Number of access users
- B. AP point
- C. Access concurrency rate
- D. User bandwidth requirements
Answer: B
NEW QUESTION # 91
In the inter-WAC roaming scenario, different WACs can be grouped, and STAs can roam between WACs in the same group. An AC can serve as a roaming group server for multiple roaming groups at the same time, but can only join one roaming group itself.
- A. True
- B. False
Answer: A
NEW QUESTION # 92
Due to the small area and single user needs of a certain store, FAI AP is used to deploy a Wi-Fi 6 network.
So, when implementing a project, which of the following methods can engineers use to log in to the FAT AP to configure services? (Multiple choice)
- A. Console port login
- B. Mini USB port login
- C. Login via direct network connection
- D. Wireless login
Answer: A,B,C,D
NEW QUESTION # 93
The WLAN network of a certain enterprise headquarters adopts WAC+FIT AP networking mode, and the branch adopts Leader AP networking mode. Now the headquarters is required to uniformly manage the WLAN network of the branch, so the Leader AP of the branch needs to be switched to FIT AP.
- A. True
- B. False
Answer: A
NEW QUESTION # 94
During the WLAN planning process, why is a site survey necessary?
- A. To identify and mitigate potential interference or coverage gaps
- B. To analyze client behavior and application usage
- C. To configure security protocols for the network
- D. To monitor network traffic in real-time
Answer: A
NEW QUESTION # 95
In Huawei's intelligent roaming solution, during the roaming execution phase, for terminals that support the () protocol, the AP uses the BSS transition mechanism to take the user offline, prompting the terminal to roam to the target AP.
Answer:
Explanation:
802.11v
NEW QUESTION # 96
......
Trend for H12-323_V2.0 pdf dumps before actual exam: https://itcertspass.prepawayexam.com/Huawei/braindumps.H12-323_V2.0.ete.file.html