[2024] Use Valid New 300-730 Questions - Top choice Help You Gain Success
300-730 Exam Practice Materials Collection
NEW QUESTION # 56
What are two functions of ECDH and ECDSA? (Choose two.)
- A. digital signature
- B. nonrepudiation
- C. encryption
- D. key exchange
- E. revocation
Answer: A,D
NEW QUESTION # 57
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?
- A. IKEv2 IKE_AUTH
- B. IKEv2 IKE_SA_INIT
- C. IKEv2 INFORMATIONAL
- D. IKEv2 CREATE_CHILD_SA
Answer: D
Explanation:
The IKEv2 CREATE_CHILD_SA packet is used to establish a new security association (SA) between two peers. This packet contains the details of the exchange, including the traffic selectors, the cryptographic algorithms and keys to be used, and any other relevant information
NEW QUESTION # 58
Which Cisco AnyConnect component ensures that devices in a specific internal subnet are only accessible using port 443?
- A. WebACL
- B. routing
- C. VPN filter
- D. split tunnel
Answer: C
NEW QUESTION # 59
An engineer is creating an URL object on Cisco FMC. How must it be configured so that the object will match for HTTPS traffic in an access control policy?
- A. Use the subject common name from the website certificate.
- B. Define the path to the individual webpage that uses HTTPS.
- C. Use the FQDN including the subdomain for the website.
- D. Specify the protocol to match (HTTP or HTTPS).
Answer: C
Explanation:
Use the FQDN including the subdomain for the website. According to the Firepower Management Center Configuration Guide, Version 6.61, when you create a URL object, you must use the fully qualified domain name (FQDN) of the website, including any subdomains, and omit the protocol prefix (HTTP or HTTPS). For example, to match www.example.com, you must enter www.example.com as the URL object value, not http://www.example.com or
https://www.example.com. The system automatically matches both HTTP and HTTPS traffic for the same FQDN. Specifying the protocol to match (HTTP or HTTPS) is not required and will result in an invalid URL object. Using the subject common name from the website certificate or defining the path to the individual webpage that uses HTTPS are not supported options for URL objects.
NEW QUESTION # 60
Refer to the exhibit.
Which two conclusions should be drawn from the DMVPN phase 2 configuration? (Choose two.)
- A. Next-hop-self is required.
- B. EIGRP is used as the dynamic routing protocol.
- C. EIGRP neighbor adjacency will fail.
- D. Spoke-to-spoke communication is allowed.
- E. EIGRP route redistribution is not allowed.
Answer: B,D
NEW QUESTION # 61
Refer to the exhibit.
Which type of Cisco VPN is shown for group Cisc012345678?
- A. Clientless SSLVPN
- B. Cisco AnyConnect Client VPN
- C. GETVPN
- D. DMVPN
Answer: B
NEW QUESTION # 62
DRAG DROP
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.
Select and Place:
Answer:
Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec- conn-dmvpn-xe-16-book/sec-conn-dmvpn-summ-maps.html
NEW QUESTION # 63
Refer to the exhibit.
An SSL client is connecting to an ASA headend. The session fails with the message "Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?
- A. phase 5: NAT
- B. phase 4: ACCESS-LIST
- C. phase 9: rpf-check
- D. phase 3: UN-NAT
Answer: D
NEW QUESTION # 64
What is a requirement for smart tunnels to function properly?
- A. The user on the client machine must have admin access.
- B. Java or ActiveX must be enabled on the client machine.
- C. Stateful failover must not be configured.
- D. Applications must be UDP.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.html
NEW QUESTION # 65
Which parameter is initially used to elect the primary key server from a group of key servers?
- A. lowest IP address
- B. highest-priority value
- C. code version
- D. highest IP address
Answer: B
NEW QUESTION # 66
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?
- A. interface virtual-access
- B. interface tunnel
- C. ip nhrp redirect
- D. interface virtual-template
Answer: D
Explanation:
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, the command that is needed for the hub to be able to terminate FlexVPN tunnels is interface virtual-template. The interface virtual-template command is used to configure a virtual template interface which provides a secure tunnel for FlexVPN connections. The other commands listed - interface virtual-access, ip nhrp redirect, and interface tunnel - are not related to FlexVPN and are not used to terminate FlexVPN tunnels.
NEW QUESTION # 67
A DMVPN spoke is configured with IKEv1 to secure the tunnel. Despite having a configuration similar to other working spokes, the tunnel is not coming up. Packet captures on the spoke show packets leaving the spoke router, but not making it to the hub router. Which solution resolves this issue?
- A. Enable the tunnel interface with the no shutdown command.
- B. Ensure that devices between the hub and spoke are not blocking GRE traffic.
- C. Configure the spoke and hub to use the same IKE version.
- D. Ensure that devices between the hub and spoke are not blocking ESP traffic.
Answer: D
NEW QUESTION # 68
While troubleshooting, an engineer finds that the show crypto isakmp sa command indicates that the last state of the tunnel is MM_KEY_EXCH. What is the next step that should be taken to resolve this issue?
- A. Ensure that UDP 500 is not being blocked between the devices.
- B. Verify that the ISAKMP proposals match.
- C. Confirm that the pre-shared keys match on both devices.
- D. Correct the peer's IP address on the crypto map.
Answer: C
Explanation:
https://www.networkworld.com/article/2288666/chapter-4--common-ipsec-vpn-issues.html
NEW QUESTION # 69
Which configuration construct must be used in a FlexVPN tunnel?
- A. IKEv2 profile
- B. IKEv1 policy
- C. multipoint GRE tunnel interface
- D. EAP configuration
Answer: A
Explanation:
Section: Remote access VPNs
NEW QUESTION # 70
Refer to the exhibit.
What is configured as a result of this command set?
- A. FlexVPN client profile for IPv6
- B. FlexVPN server for an IPv6 dVTI session
- C. FlexVPN server to authenticate IPv6 peers by using EAP
- D. FlexVPN server to authorize groups by using an IPv6 external AAA
Answer: A
NEW QUESTION # 71
Refer to the exhibit.
Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)
- A. authentication certificate
- B. group-alias General enable
- C. group-policy General internal
- D. authentication aaa
- E. group-url https://172.16.31.10/General enable
Answer: B,C
NEW QUESTION # 72
In a FlexVPN deployment, the spokes successfully connect to the hub, but spoke-to-spoke tunnels do not form. Which troubleshooting step solves the issue?
- A. Verify the spoke configuration to check if the NHRP redirect is enabled.
- B. Verify that the tunnel interface is contained within a VRF.
- C. Verify the hub configuration to check if the NHRP shortcut is enabled.
- D. Verify that the spoke receives redirect messages and sends resolution requests.
Answer: D
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec- conn-dmvpn-15-mt-book/sec-conn-dmvpn-summ-maps.pdf
NEW QUESTION # 73
Cisco AnyConnect Secure Mobility Client has been configured to use IKEv2 for one group of users and SSL for another group. When the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect. What might be the problem?
- A. Client services are not enabled.
- B. Client software updates are not supported with IKEv2.
- C. The XML profile is not configured correctly for the affected users.
- D. The new client image does not use the same major release as the current one.
Answer: B
Explanation:
Cisco AnyConnect Secure Mobility Client uses IKEv2 for one group of users and SSL for another group. However, IKEv2 does not support client software updates, which means that when the administrator configures a new AnyConnect release on the Cisco ASA, the IKEv2 users cannot download it automatically when they connect.
NEW QUESTION # 74
Which redundancy protocol must be implemented for IPsec stateless failover to work?
- A. VRRP
- B. HSRP
- C. GLBP
- D. SSO
Answer: B
Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike- protocols/17826-ipsec-feat.html
NEW QUESTION # 75
An organization wants to distribute remote access VPN load across 12 VPN headend locations supporting 25,000 simultaneous users. Which load balancing method meets this requirement?
- A. one VPN profile per site
- B. DNS-based load balancing
- C. equal cost, multipath load balancing
- D. AnyConnect native load balancing
Answer: B
NEW QUESTION # 76
......
Maximum Grades By Making ready With 300-730 Dumps: https://itcertspass.prepawayexam.com/Cisco/braindumps.300-730.ete.file.html