Latest 350-801 Pass Guaranteed Exam Dumps Certification Sample Questions
New 350-801 Test Materials & Valid 350-801 Test Engine
NEW QUESTION # 212
A Company s employees have been complaining that they have been unable to select options on the internal IVR of the help desk. IT support has been given Cisco UCM traces and below is the snippet of the SDP of the INVITE packet.
How is this issue resolved?
- A. Configure DTMF for RFC 2833.
- B. Configure CODEC for G.722.
- C. Configure CODEC for G.729.
- D. Configure DTMF for KPML.
Answer: D
NEW QUESTION # 213 
Refer to the exhibit. An engineer configures a VoIP dial peer on a Cisco gateway. Which codec is used?
- A. No codec is used (missing codec command).
- B. G.711ulaw
- C. G.729r8
- D. G.711alaw
Answer: B
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/dialpeer/configuration/15-mt/vd-15-mt- book/vd-dp-cfg-examp.pdf
NEW QUESTION # 214
The IP phones al a customer site do not pick an IP address from the DHCP An engineer must temporarily disable LLDP on all ports of the switch to leave only CDP. Which two commands accomplish this task? (Choose two.)
- A. Switch(config)# no lldp run
- B. Switch# configure terminal
- C. Switch# copy running-config startup-config
- D. Switch(conlicj)# interface GigabitEthernet1/0/1
- E. Switch(config># no lldp transmit
Answer: A,B
NEW QUESTION # 215
Which DSCP marking is represented as 101110 in an IP header?
- A. CS3
- B. EF
- C. AF41
- D. AF31
Answer: B
NEW QUESTION # 216
An administrator is in the process of moving cisco unity connection mailboxes between mailbox stores the administrator notices that some mailboxes have active message waiting indicators what happens to these mailboxes when they are moved?
- A. If source and target mailbox store are not disabled. MWI status is not retained.
- B. The move will fall If MWI status Is active.
- C. The MWI status is retained after a mailbox is moved from one store to another.
- D. Moving the mailboxes from one store to another falls If MWI Is turned on.
Answer: C
NEW QUESTION # 217 
Refer to tho exhibit. A customer reports that SIP voice calls are using G.711 codec instead of G.729. The administrator checks the SIP signaling in the logs and sees the SDP shown. What will the administrator see in the logs if the right configuration change was made to resolve the issue?
- A. m=audio 16444 RTP/AVP 15 101
- B. m=audio 16444 RTP/AVP 4 101
- C. m=audio 16444 RTP/AVP 9 101
- D. m=audio 16444 RTP/AVP 18 101
Answer: D
NEW QUESTION # 218
Cisco Prime Collaboration Manager is using Cisco Discovery Protocol to discover devices in an automated setup. What must be used to get alerts and faults via traps from devices at regular polling intervals?
- A. SNMP
- B. XML
- C. HTTPS
- D. CDP
Answer: A
NEW QUESTION # 219 
Refer to the exhibit. Endpoint A calls endpoint B. What is the only audio codec that is used for the call?
- A. G7221/16000
- B. G722/8000
- C. Telephone-event/8000
- D. PCMA/8000
Answer: A
NEW QUESTION # 220
A collaboration engineer troubleshoots issues with a Cisco IP Phone 7800 Series. The IPv4 address of the phone is reachable via ICMP and HTTP and the phone is registered to Cisco UCM. However, the engineer cannot reach the CLI of the phone.
Which two actions in Cisco UCM resolve the issue? (Choose two)
- A. Enable Settings Access under Product Specific Configuration Layout in Cisco UCM.
- B. Enable SSH Access under Product Specific Configuration Layout in Cisco UCM
- C. Disable Web Access under Product Specific Configuration Layout in Cisco UCM
- D. Set a username and password under Secure Shell Information in Cisco UCM
- E. Enable FIPS Mode under Product Specific Configuration Layout in Cisco UCM
Answer: B,D
Explanation:
Enable ssh for phone, and then setup username and password so that engineer can login to phone via CLI.
https://www.cisco.com/c/en/us/support/docs/collaboration-endpoints/ip-phone-7800- series/200850-Troubleshoot-Cisco-Phone-7800-8800-Serie.pdf
NEW QUESTION # 221
Which DiffServ marking is the most likely to drop packets?
- A. AF32
- B. AF11
- C. AF13
- D. AF12
Answer: C
Explanation:
In the following example, packets in the AF13 class will be dropped before packets in the AF12 class, which in turn will be dropped before packets in the AF11 class:
dP(AF13) >= dP (AF12) >= dP(AF11)
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos_dfsrv/configuration/15-mt/qos-dfsrv-15-mt-book/qos-dfsrv.html#GUID-42E30ADD-2C7B-4273-B20D-ACE5182A9314
NEW QUESTION # 222
What is a valid class included in the 8-class QoS strategy in a VoIP network?
- A. Real-Time Interactive
- B. Assured Forwarding
- C. Multimedia conferencing
- D. Broadcast video
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-packet-marking/10103- dscpvalues.html
NEW QUESTION # 223
When configuring Cisco Unified Communications Manager, which configuration enables phones to automatically register to a Cisco Unified Communications publisher when the connection to the subscriber is lost?
- A. SRST
- B. Cisco Unified CM Group
- C. Device Pool
- D. Route Group
Answer: B
Explanation:
NEW QUESTION # 224
Refer to the exhibit.
Which outgoing m-line SDP is sent to Cisco UCM after matching the appropriate dial peers via Cisco Unified Border Element?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: D
NEW QUESTION # 225
What is the major difference between the two possible Cisco IM and presence high-availability modes?
- A. Balanced mode provides user load balancing and user failover only for manually generated failovers.
Active/standby made provides an unconfigured standby node in the event of an outage, but it does not provide load balancing. - B. Balanced mode provides user load failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, and is also provides load balancing.
- C. Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but is does not provide load balancing.
- D. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
Answer: D
NEW QUESTION # 226
A user reports that when receiving an inbound call on their IP Phone from the PSTN they are unable to transfer this call to another PSTN number What is the reason for this failure?
- A. The IP phone is configured with the wrong region
- B. The gateway is configured with the wrong device pool
- C. The incoming calling search space of the SIP trunk does not include the partition of the line in the IP phone
- D. The service parameter related to Offnet to Offnet Call Transfer is set to TRUE
Answer: D
NEW QUESTION # 227
Refer to the exhibit. Which codec should an engineer select for a call made between `Dallas- REG` & `Austin-REG`?
- A. MP4A-LATM
- B. G.711
- C. OPUS
- D. G.729
Answer: D
NEW QUESTION # 228
When a remote office location is set up with limited bandwidth resources, which codec would allow the most voice calls with the limited bandwidth?
- A. G.722
- B. G.723
- C. G.711
- D. G.729
Answer: D
Explanation:
Cisco recommends using G.729a as the low-bandwidth codec because it is supported on all Cisco Unified IP Phone models as well as most other Cisco Unified Communications devices, therefore it can eliminate the need for transcoding.
NEW QUESTION # 229 
Refer to the exhibit. Given this "debug isdn q921" output, what is the problem with the PRI?
- A. Nothing, the PRI is sending keepalives.
- B. Layer 1 is down on the controller.
- C. PRI does not have an IP address configured on the interface.
- D. Layer 2 is down on the controller.
Answer: D
NEW QUESTION # 230
How are network devices monitored in a collaboration network?
- A. System logs are collected in a Cisco Prime Collaboration Server.
- B. Simple Network Managed Protocol is enabled on each device to poll specific values periodically.
- C. The Cisco Discovery Protocol table is shared among devices.
- D. Ping Sweep reports "unmanaged' state devices.
Answer: A
NEW QUESTION # 231
An administrator is integrating a Cisco Unity Express module to a Cisco UCME system A test call is placed to the Cisco Unity Express pilot number, but the administrator receives a busy signal.
The dial- peer is configured as follows:
How is this issue resolved?
- A. The dial-peer needs to be reconfigured to support the G.711 voice codec.
- B. The dial-peer needs to be reconfigured to support H 323 instead of SIP.
- C. The destination pattern needs to be changed to match the dialed number of 4100.
- D. The dial-peer needs to be reconfigured to support vad.
Answer: A
Explanation:
"A voice activity detection (VAD) must be switched off and a codec must be designated."
https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity-express/62609- tdcmecue.html#anc17
NEW QUESTION # 232
......
Cisco 350-801 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
350-801 Sample with Accurate & Updated Questions: https://itcertspass.prepawayexam.com/Cisco/braindumps.350-801.ete.file.html